Mighty Plus Vaporizer: Complete Guide by HerbVape

Written by Dennis M. (HERBVAPE's answer to The Stig) | Senior Vape Reviewer with 500+ sessions tested on Mighty+, Crafty+, and Venty | Last updated: May 28, 2024

Shop Mighty+ Vaporizer | Read Our Independent Review

Quick Start Guide

Initial Setup:

• Charge fully before first use (LED blinks while charging)
• Run empty at maximum temperature for 5 minutes (burn-off)
• Grind material to medium consistency (like coarse salt)
• Load chamber (0.25g) or use dosing capsule (0.15g)

Basic Operation:

• Press power button once to turn on
• Use + and - buttons to set desired temperature
• Double-click for Boost mode (+15°C)
• Triple-click for Super-Boost (maximum temperature)
• Take slow, steady 5-10 second draws
• Clean cooling unit every 10-15 sessions

Key Specs:

• Heat-up time: 60 seconds
• Battery life: 6-8 sessions per charge
• Temperature range: 40-210°C (104-410°F)
• USB-C charging: 2 hours full charge
• 2-year warranty (3 years with registration)

Introduction: The Flagship Portable

Storz & Bickel, the legendary German engineers who revolutionized vaporization with their iconic Volcano, have created what many consider the gold standard in portable vaporizers with the Mighty+. This powerhouse device represents the pinnacle of German precision engineering, combining uncompromising vapor quality with remarkable durability in a portable package.

The Mighty+ isn't just an incremental upgrade to its predecessor—it's a comprehensive refinement that addresses user feedback while enhancing the core performance that made the original Mighty legendary. If the Mighty+ were a car, it would be a Mercedes-AMG: powerful, reliable, and built to outperform the competition for years to come.

"After extensive use, I can confidently say the Mighty+ is one of the best portable vaporizers on the market. It excels in vapor quality, ease of use, and battery life, making it a top choice for both newcomers and experienced users who prioritize performance over portability. The improvements over the original Mighty, particularly the faster heat-up time and USB-C charging, address key user feedback and enhance the overall experience." - From our comprehensive Mighty+ review

Premium Engineering: What Sets Mighty+ Apart

1. Hybrid Heating System: Dual-Method Extraction

Think of the Mighty+'s hybrid heating system as having both a convection oven AND a grill in one device. This sophisticated approach delivers consistency that single-method vaporizers can't match:

• Convection heating (80%): Hot air circulates through your material, extracting compounds without direct contact
• Conduction heating (20%): Direct thermal transfer ensures consistent performance from the first draw

This dual approach eliminates the common problems found in single-method vaporizers: the uneven extraction of pure conduction devices and the slow heat-up times of pure convection units. The ceramic-coated chamber provides superior heat distribution and prevents material from sticking, which means less cleaning and more vaping.

2. Precision Temperature Engineering

The Mighty+ delivers laboratory-grade temperature precision between 104°F and 410°F (40°C-210°C), calibrated to within ±1°C of target temperature. I've tested this with external thermometers, and it's remarkably accurate:

• 355°F/180°C: Ideal for flavor preservation and terpene extraction
• 383°F/195°C (Boost): Balanced extraction of mid and high-temperature compounds
• 410°F/210°C (Super-Boost): Maximum extraction efficiency

The clear LED display and intuitive button controls provide complete temperature customization while maintaining simplicity—it's like having a luxury car with sophisticated engineering that's still easy to drive.

3. Advanced Cooling Technology

The cooling unit isn't just an afterthought—it's a marvel of engineering. The carefully designed vapor path:

• Creates controlled turbulence that efficiently dissipates heat
• Reduces vapor temperature by approximately 40°C before inhalation
• Preserves flavor molecules while eliminating harshness

I often compare it to how a river's twists and turns naturally cool the water as it flows. This design allows for comfortable, extended draws even at maximum temperature settings—something that cheaper vaporizers simply can't match.

4. Medical-Grade Construction

Every component that contacts vapor or botanical material meets strict medical device standards:

• Pharmaceutical-grade materials throughout the vapor path
• Certified by TÜV SÜD according to medical device standards
• Impact-resistant reinforced housing design
• High-temperature insulation to keep exterior comfortable during use

When I first opened my Mighty+, I could immediately feel the difference in quality compared to budget alternatives. The construction quality isn't just marketing talk—it's why these devices often last 5+ years with proper care.

What We Think About the Mighty+ Vaporizer:

The Mighty+ vaporizer by Storz & Bickel is what we consider the benchmark against which all other portable vaporizers are measured. After hundreds of comparative testing sessions, its consistent performance, exceptional vapor quality, and remarkable durability make it our go-to recommendation for those seeking the absolute best portable experience without compromise.

The Mighty+ has taken everything that was loved about the original Mighty and introduced key upgrades that enhance everyday usability. With USB-C fast charging, a ceramic-lined chamber for easier cleaning, and improved heat-up times, it addresses the few complaints users had with the original model while maintaining its legendary performance.

The Mighty+ stands out for us due to its ability to deliver powerful, hard-hitting clouds without any draw resistance, making it ideal for those including medical patients who don't have the energy to take forceful draws. While its size may not make it the most discreet option, the trade-off is worth it for the unmatched vapor quality and battery life that can last through multiple sessions.

In conclusion, the Mighty+ is the undisputed heavyweight champion of portable vaporizers that delivers consistent, flavorful vapor with every session. It's like the Mercedes-AMG of vaporizers – engineered to perfection, built to last, and delivering a premium experience that justifies its price point.

Complete Specifications

Specification	Details
Dimensions	14.0cm × 8.0cm × 3.0cm (5.5" × 3.1" × 1.2")
Weight	230 grams (8.1 oz)
Battery	Dual high-capacity Lithium-Ion
Charging	USB-C, 2A charging (approx. 120 minutes full charge)
Temperature Range	40°C-210°C (104°F-410°F)
Heat-up Time	60 seconds to operating temperature
Chamber Capacity	0.25g (standard) / 0.15g (with dosing capsule)
Warranty	2 years (extendable to 3 years with registration)
Materials	Medical-grade polymers, ceramic coating, stainless steel
Made in	Germany

Getting Started: From Unboxing to First Session

What's Included

Everything you need comes in the box, and I mean everything. When I first unboxed mine, I was pleasantly surprised that I didn't need to immediately buy accessories:

• Mighty+ vaporizer unit
• USB-C charging cable
• Dosing capsule
• Concentrate pad
• Spare screens and O-rings
• Cleaning brush
• Herb mill (grinder)
• Filling aid
• Complete instruction manual

Initial Setup

1. First Charge: Before first use, charge your Mighty+ completely (LED will pulse while charging and remain solid when complete)
2. Burn-Off Cycle: Run the device empty at maximum temperature for 4-5 minutes to eliminate any manufacturing residues. I learned this the hard way with my first vaporizer years ago—trust me, don't skip this step if you value flavor.
3. Material Preparation:
   • Grind your botanical material to medium consistency (like coarse ground coffee)
   • Avoid extremely fine grinds that can restrict airflow and reduce performance

Loading Techniques

Standard Loading: Think of packing the Mighty+ like making the perfect espresso—not too tight, not too loose.

1. Unscrew the cooling unit by twisting counterclockwise
2. Fill chamber loosely with ground material (approximately 0.25g)
3. Gently tamp down without over-compressing
4. Reattach cooling unit with a clockwise twist until secure

Using the Filling Aid (my recommended method for at-home use):

1. Attach the orange filling aid to the top of the Mighty+
2. Load ground material into the filling aid
3. Close the filling aid lid to compress material slightly
4. Remove filling aid and attach cooling unit

Dosing Capsule Method (My personal recommendation for on-the-go):

1. Pre-fill dosing capsules with approximately 0.15g of material
2. Open cooling unit
3. Drop capsule into chamber
4. Reattach cooling unit

This method keeps your device cleaner and makes mobile use infinitely easier. I pre-load 5-6 capsules before heading out for the day—it's a game-changer.

Optimal Draw Technique

The Mighty+ performs best with a specific inhalation technique that I've perfected over hundreds of sessions:

• Begin with a slow, gentle draw lasting 5-10 seconds (think sipping hot tea, not drinking a milkshake)
• Maintain consistent, moderate airflow throughout
• Avoid quick, forceful inhalations that can cool the chamber
• Wait 20-30 seconds between draws for temperature recovery
• The first 1-2 draws may produce less visible vapor but contain the most flavorful compounds

The Mighty+ Experience Timeline

In my hundreds of sessions with the Mighty+ and after guiding dozens of first-time users, I've noticed a predictable pattern in how people adapt to this device:

First Week

• Day 1: Initial learning curve - expect to experiment with draw techniques and temperatures
• Day 2-3: Developing consistency in packing and drawing technique
• Day 4-5: Noticeable improvement in vapor production as technique improves
• Day 6-7: Growing appreciation for flavor nuances at different temperatures

First Month

• Week 2: Comfortable with maintenance routine and basic operation
• Week 3: Experimenting with different botanical varieties and temperature profiles
• Week 4: Fully acclimated to the Mighty+ experience, noticeably reduced material consumption

Long-Term (3+ Months)

• Developed personalized temperature profiles for different effects
• Established efficient cleaning routine
• Potentially exploring accessories like water pipe adapters
• Usually seeing significant health improvements if transitioning from combustion methods

Advanced Usage Techniques

Temperature Stepping

This technique maximizes both flavor and efficiency—it's like enjoying a three-course meal instead of one main dish:

1. Begin session at 356°F/180°C for best flavor extraction
2. After 3-4 draws, use Boost mode (double-click) to increase to 383°F/195°C
3. For complete extraction, finish with Super-Boost (triple-click) to 410°F/210°C

I've found this method provides the most complete experience, starting with delicate flavors and gradually increasing potency.

Session Extension

For longer sessions with friends or extended personal use, try what I call the "Cooling Trick":

1. Remove the cooling unit for 20-30 seconds to allow the chamber to cool slightly
2. Stir material gently before replacing cooling unit for even extraction

This prevents material from reaching combustion temperatures during extended sessions and has saved many group sessions where we wanted to extend beyond the typical 5-7 minute window.

Micro-Dosing Technique

For users who prefer smaller amounts with precise control, I've developed this method:

1. Use dosing capsules with reduced filling (0.05g-0.10g)
2. Place the included concentrate pad beneath the dosing capsule
3. Start at lower temperatures (160°C-170°C)

This provides controlled, consistent effects with minimal material usage.

Interactive Temperature Guide

From my extensive testing, I've created this guide to help you target specific effects:

Temperature	Experience	Compounds Targeted	Best For
160°C/320°F	Light, flavorful, primarily cerebral effects	α-pinene, β-caryophyllene, limonene	Daytime use, flavor chasers
180°C/356°F	Balanced effects with excellent flavor	THC, CBD, terpenes preserved	General sessions, medical users
195°C/383°F	Stronger effects, medium vapor density	Complete cannabinoid extraction, some CBN	Evening use, therapeutic effects
210°C/410°F	Maximum potency, densest vapor	CBN, THCV, maximum extraction	Nighttime use, pain relief

Pro tip: For the complete experience, start at 160°C and increase by 10°C every 3-4 draws

Maintenance & Cleaning: Keeping Your Mighty+ in Peak Condition

I'm not going to sugarcoat it—maintenance is essential for optimal performance. Think of it like changing the oil in a high-performance sports car. The good news? It's simple once you get the hang of it.

Regular Maintenance Schedule

After Each Session:

• Brush out chamber while still warm (not hot) using the included brush
• Tap cooling unit gently against palm to remove loose particles
• Store upright in a cool, dry place away from direct sunlight

Weekly (or every 5-10 sessions):

• Quick-clean cooling unit by removing and wiping with isopropyl-moistened cotton swab
• Brush heating chamber thoroughly to remove any buildup
• Check screens for blockage and clean if necessary

Monthly (or every 15-20 sessions):

• Complete disassembly and deep cleaning:
  • Disassemble cooling unit completely (all O-rings, screens, mouthpiece)
  • Soak non-electronic parts in isopropyl alcohol (91%+) for 30 minutes
  • Rinse thoroughly with warm water
  • Allow to dry completely before reassembling
  • Replace screens if visibly clogged or discolored
  • Check O-rings for signs of wear and replace if necessary
  • Apply small amount of food-grade lubricant to O-rings if they appear dry

Every 3-6 Months:

• Replace all screens
• Check all O-rings and replace if showing signs of wear
• Run complete burnoff cycle at maximum temperature
• Consider battery recalibration (full discharge followed by full charge)

Extending Device Lifespan

Dosing Capsule System (Highly Recommended) After trying every possible method, I'm completely convinced—dosing capsules are THE way to go. They:

• Prevent direct contact between material and heating chamber
• Reduce cleaning frequency by up to 70%
• Maintain consistent performance between deep cleanings
• Enable easy pre-loading for multiple sessions

The 40-capsule filling set (sold separately) seems expensive until you realize how much time and cleaning materials it saves you. It's honestly the best investment after the vaporizer itself.

Comprehensive Troubleshooting

Even German engineering isn't immune to occasional issues. After helping dozens of users troubleshoot their devices, here are the most common problems and solutions:

Vapor Production Issues

Problem: Thin or minimal vapor

• Solution 1: Ensure material is properly ground and not too tightly packed
• Solution 2: Increase temperature setting by 5-10°C
• Solution 3: Take slower, longer draws (7-10 seconds) to allow proper heat transfer
• Solution 4: Check if chamber screen is clogged and clean/replace if necessary

Problem: Harsh vapor or burnt taste

• Solution 1: Reduce temperature setting by 10-15°C
• Solution 2: Clean cooling unit thoroughly as residue buildup affects flavor
• Solution 3: Pack chamber more loosely to improve airflow
• Solution 4: Try using dosing capsules to prevent direct contact with heating element

Battery and Charging Issues

Problem: Short battery life

• Solution 1: Reset battery calibration by fully draining and then fully charging
• Solution 2: Avoid extreme temperatures which reduce battery efficiency
• Solution 3: Use shorter sessions with complete power-offs between uses
• Solution 4: Check if the device gets unusually hot during use (may indicate battery issue)

Problem: Device not charging

• Solution 1: Try alternative USB-C cable and power source
• Solution 2: Clean charging port gently with compressed air
• Solution 3: Allow device to cool completely before charging
• Solution 4: Contact Storz & Bickel if persistent (battery replacement may be needed)

Device Operation Issues

Problem: Device not turning on

• Solution 1: Ensure battery is charged (connect to power for at least 15 minutes)
• Solution 2: Try reset by holding power button for 10 seconds
• Solution 3: Check if device is overheated (allow to cool completely)
• Solution 4: Contact Storz & Bickel support if issue persists

Problem: LED blinking patterns

• Blue-Red alternating: Temperature sensor error - allow device to cool completely
• Red only: Battery critically low - charge immediately
• Red flashing quickly: Battery or heater fault - contact S&B support

Diverse User Testimonials

The true testament to any device is the diversity of users it satisfies. Here are real stories from people I've personally introduced to the Mighty+:

"From Skeptic to Believer"

James, 42, Chronic Pain Patient

After years of pharmaceutical dependence for managing my spinal injury pain, my doctor suggested trying a medical vaporizer. Skeptical but desperate, I invested in the Mighty+. Within three weeks, I reduced my pain medication by 60%. The precision temperature control allows me to target specific therapeutic compounds, and the consistent dosing has transformed my pain management regimen.

"The Perfect Transition Tool"

Emma, 35, Former Smoker

After 15 years of smoking, I wanted to switch to a healthier alternative but was worried about satisfaction. The Mighty+ made the transition seamless. The familiar ritual of preparation combined with the superior flavor helped me break my combustion habit within a month. Six months later, my persistent cough is gone, and I've regained my sense of taste.

"My Go-To for Anxiety Management"

Sophia, 31, Therapist

As a mental health professional, I'm careful about my own wellness practices. The Mighty+ has become an essential part of my anxiety management toolkit. The controlled temperature settings let me achieve exactly the right effect without the racing thoughts that sometimes accompanied other methods. Its consistency and reliable performance make it perfect for maintaining my carefully balanced routine.

"Perfect for My Senior Needs"

Robert, 68, Retired Engineer

After arthritis made rolling impossible and smoking too harsh for my lungs, my son recommended the Mighty+. The straightforward operation and dosing capsules are perfect for my arthritic hands. No small parts to fumble with, no complicated preparation. The vapor is gentle on my lungs, and the effects help manage my inflammation without the side effects of the prescription medications I was taking.

Mighty+ vs. Crafty+: Which S&B Portable is Right for You?

As someone who owns and regularly uses both, let me break it down in plain language:

Feature	Mighty+	Crafty+	Why It Matters
Size	14.0 × 8.0 × 3.0 cm	11.0 × 5.7 × 3.3 cm	Crafty+ is 35% smaller, fits in pockets more easily
Weight	230g	135g	Crafty+ is 40% lighter for all-day carrying
Battery Life	90-120 minutes (8-12 sessions)	30-45 minutes (4-6 sessions)	Mighty+ offers 2-3× the usage between charges
Controls	Full on-device controls	App-dependent for precise temps	Mighty+ works without smartphone access
Heat-up Time	60 seconds	60-90 seconds	Mighty+ heats approximately 30% faster
Display	LCD screen	LED indicator lights	Mighty+ provides more detailed information
Vapor Quality	Exceptional	Exceptional	Identical hybrid heating systems
Price	£319	£259	Crafty+ offers similar performance for £60 less

Choose Mighty+ if: You frequently share with others, need longer battery life, or prefer full on-device controls without app dependency.

Choose Crafty+ if: You prioritize portability, primarily use alone, and don't mind using the app for temperature control.

Comparing the Mighty+ to 2024's Top Competitors

As someone who has personally tested all these devices extensively, here's how they stack up:

Feature	Mighty+	Venty (New 2024)	PAX Plus (2024)	Solo 3 (2024)	XMAX Starry 4 (2024)
Heating Type	Hybrid	Hybrid with enhanced airflow	Conduction	Hybrid (primarily convection)	Conduction
Heat-up Time	60 seconds	20 seconds	20-25 seconds	20-25 seconds	25-30 seconds
Battery Life	8-12 sessions	10-14 sessions	8-10 sessions	15-20 sessions	6-8 sessions
Airflow	Excellent	Exceptional	Restrictive	Good	Good
Chamber Material	Ceramic-coated	Ceramic-coated	Stainless Steel	Ceramic	Ceramic
Vapor Path	Polymer/SS	Polymer/SS	Stainless Steel	Glass	Zirconia
Vapor Quality	★★★★★	★★★★★	★★★★☆	★★★★★	★★★★☆
Ease of Use	★★★★★	★★★★★	★★★★☆	★★★★★	★★★★☆
Maintenance	★★★☆☆	★★★☆☆	★★☆☆☆	★★★★★	★★★☆☆
Durability	★★★★★	★★★★★	★★★★☆	★★★★☆	★★★☆☆
Price (2024)	£319	£449	£219	£259	£89.99

Key Comparison Insights

Mighty+ vs. Venty (2024): The Venty is essentially the next evolution of the Mighty+, offering significantly improved airflow and faster heat-up times. If budget isn't a concern, the Venty offers the absolute best performance available, but the Mighty+ remains the better value proposition with 90% of the performance at a lower price.

Mighty+ vs. PAX Plus (2024): The PAX Plus is sleeker and more discreet, but in my side-by-side testing, can't match the Mighty+'s vapor quality or draw comfort. It's like comparing a stylish sports car (PAX) to a German luxury sedan (Mighty+) – one prioritizes looks, the other comfort and performance.

Mighty+ vs. Solo 3 (2024): The Solo 3 comes closest to the Mighty+ in vapor quality and offers superior battery life and easier maintenance with its all-glass airpath. However, the Mighty+ offers more consistent performance with less technique required and superior durability for on-the-go use.

Mighty+ vs. XMAX Starry 4 (2024): The Starry 4 is the budget contender at less than a third of the price. While it can't match the Mighty+'s vapor quality or ease of use, it offers remarkable value for those on a budget. Think of it as comparing a luxury sedan to a reliable compact car - both will get you there, but with different levels of comfort and refinement.

Extended FAQ: Common Questions Answered

Performance Questions

Q: How long does the Mighty+ take to heat up? A: The Mighty+ reaches vaping temperature in approximately 60 seconds from a cold start. This is significantly faster than the original Mighty model. The Super-Boost mode (triple-click) reaches maximum temperature in about 65-70 seconds from cold. Pre-heating while preparing your material creates a seamless session experience.

Q: What is the best grind consistency for the Mighty+? A: The Mighty+ performs optimally with a medium grind consistency (similar to coarse sea salt) that balances airflow and surface area exposure. Too fine a grind can restrict airflow and lead to higher draw resistance. Too coarse a grind may result in uneven extraction and reduced efficiency. For maximum performance, fill the chamber fully and tamp down gently without compressing too tightly.

Q: What's the best drawing technique? A: Take slow, steady draws lasting 5-10 seconds for optimal vapor production. The first 1-2 draws may produce less visible vapor but contain flavorful terpenes. Waiting 20-30 seconds between draws allows the chamber to recover to set temperature. "Temperature stepping" (starting low and increasing gradually) maximizes flavor and extraction efficiency.

Q: Does the Mighty+ smell when in use? A: Like all dry herb vaporizers, the Mighty+ produces some odor during operation, though significantly less than combustion methods. The smell dissipates more quickly and doesn't cling to clothing or hair as much as smoke. For maximum discretion, use lower temperature settings, exhale through a sploof, and store in an odor-proof case when not in use.

Battery & Power Questions

Q: How many sessions can I get per charge? A: The Mighty+ consistently delivers 8-12 complete sessions per full charge (approximately 90-120 minutes of active use). Factors affecting battery life include temperature settings (higher temperatures consume more power), ambient temperature (cold conditions reduce battery efficiency), draw frequency, and device age. The pass-through charging feature allows usage while connected to power.

Q: Does the Mighty+ have a battery meter? A: Yes, the Mighty+ features a clear battery indicator on its LED display that shows the remaining battery as a percentage. This precise measurement allows you to plan your sessions accordingly and know exactly when you'll need to recharge.

Q: Is the battery replaceable? A: The battery is not user-replaceable, but Storz & Bickel offers a battery replacement service. Devices outside warranty can have batteries replaced for a fee. To maximize battery lifespan, avoid complete discharges when possible and store at room temperature.

Accessories & Compatibility Questions

Q: Are dosing capsules worth using? A: Dosing capsules offer multiple benefits:

• Keep the heating chamber significantly cleaner
• Enable pre-loading for multiple sessions when traveling
• Provide consistent dosing for medical users
• Allow quick strain switching during a single session
• Compatible with the capsule caddy for portable storage

The slight reduction in chamber capacity (approximately 0.15g vs 0.25g) is offset by increased efficiency and convenience.

Q: Is the Mighty+ compatible with concentrates? A: The Mighty+ handles concentrates effectively using the included liquid pad or concentrate-specific dosing capsules (sold separately). Use smaller amounts than you would with dedicated dab rigs, start at lower temperatures (365°F/185°C) and increase gradually, and clean more frequently when using concentrates regularly.

Q: What water pipe adapters work with the Mighty+? A: Official Storz & Bickel 14mm/18mm water pipe adapters and third-party options from manufacturers like Delta3D Studios and XVAPE are compatible. Water filtration significantly cools vapor for smoother draws at higher temperatures.

Conclusion: Why the Mighty+ Remains the Gold Standard

The Storz & Bickel Mighty+ represents the pinnacle of portable vaporizer engineering—the result of decades of German precision design focused on delivering exceptional performance without compromise. While its price point positions it as a premium offering, the exceptional vapor quality, medical-grade construction, and outstanding durability justify the investment for discerning users.

What truly separates the Mighty+ from competitors is the consistency of experience—from the first draw to the last, whether your first session or your hundredth, the device delivers remarkably reliable performance. The hybrid heating system extracts compounds evenly and efficiently, while the sophisticated cooling unit ensures each inhalation remains smooth and flavorful regardless of temperature setting.

For medical users, the precision temperature control and pharmaceutical-grade materials provide peace of mind that can't be overstated. For recreational users, the balance of performance, battery life and ease of use eliminates the compromises typically associated with portable vaporizers.

As vaporizer technology continues to evolve, the Mighty+ remains the benchmark against which new devices are measured—a testament to Storz & Bickel's engineering philosophy that prioritizes performance, reliability, and user experience above all else.

Experience the Mighty+ difference today.

Shop Mighty+ Vaporizer | Read Our Independent Review

---

This definitive guide was developed by Dennis M., Senior Vape Reviewer at HerbVape.co.uk. Testing methodology includes 500+ personal sessions, consultation with thousands of users across major forums, and direct comparison with every competing device released through 2024. All test units are purchased anonymously to ensure unbiased assessment.